The Pool Supply Shop 1.5 HP Round Threaded Shaft Horizontal Pool Pump Motor
If you don't want to spend much time maintaining the pools, this motor is a must-have accessory. The performance shortens run times and reduces energy consumption leading to lower operating costs. With this motor, you don't have to compromise with performance and quality.
Product Features:
Stainless steel shaft for corrosion protection
New triple seal protection on pump end bearing
Voltage change device
Premium sealed 203 bearings both ends
Definitive shaft access (7/16" wrench)
Open accessible terminal board and wiring compartment for easy installation
Pump motor has a threaded shaft that allows for convenient and direct mounting
Additional Features:
Output HP: 1.5 HP
Frequency: 60 Hz
Current: 8.6/17.2 A
Service factor: 1
Output KW: 1.1 kW
Voltage: 230/115 V
Speed: 3450 rpm
Poles: 2
Phase: 1
Insulation class: F
Mounting: round
Drive end bearing: ball
Enclosure: open drip proof
Ambient temperature: 50°C
Frame: 56J
Thermal protection: automatic
Motor orientation: horizontal
Electrical type: capacitor start induction run
Rotation: counter clockwise pump end
Dimensions: 9.25"H x 9.25"W x 16.75"L
Shaft diameter: 0.625"
Shaft extension: 2.562"
Frame length: 8.38"
Material(s): stainless steel
Frame material: rolled steel Item:34259530
If you don't want to spend much time maintaining the pools, this motor is a must-have accessory. The performance shortens run times and reduces energy consumption leading to lower operating costs. With this motor, you don't have to compromise with performance and quality.
Product Features:
Stainless steel shaft for corrosion protection
New triple seal protection on pump end bearing
Voltage change device
Premium sealed 203 bearings both ends
Definitive shaft access (7/16" wrench)
Open accessible terminal board and wiring compartment for easy installation
Pump motor has a threaded shaft that allows for convenient and direct mounting
Additional Features:
Output HP: 1.5 HP
Frequency: 60 Hz
Current: 8.6/17.2 A
Service factor: 1
Output KW: 1.1 kW
Voltage: 230/115 V
Speed: 3450 rpm
Poles: 2
Phase: 1
Insulation class: F
Mounting: round
Drive end bearing: ball
Enclosure: open drip proof
Ambient temperature: 50°C
Frame: 56J
Thermal protection: automatic
Motor orientation: horizontal
Electrical type: capacitor start induction run
Rotation: counter clockwise pump end
Dimensions: 9.25"H x 9.25"W x 16.75"L
Shaft diameter: 0.625"
Shaft extension: 2.562"
Frame length: 8.38"
Material(s): stainless steel
Frame material: rolled steel
