The Pool Supply Shop 2.75 HP C Face Threaded Shaft Horizontal Pool Pump Motor
If you don't want to spend much time maintaining the pools, this motor is a must-have accessory. The performance shortens run times and reduces energy consumption leading to lower operating costs. With this motor, you don't have to compromise with performance and quality.
Product Features:
Stainless steel shaft for corrosion protection
Long lasting with triple seal protection to prevent water and debris intrusion
Voltage change device
Premium sealed 203 bearings both ends
Definitive shaft access (7/16" wrench)
Fast and easy installation with the open and accessible terminal board and wiring compartment
Designed for optimal performance and efficiency
Pump motor has a threaded shaft that allows for convenient and direct mounting
Additional Features:
Output HP: 2.75 HP
Frequency: 60 Hz
Service factor: 1
Output KW: 2.1 kW
Voltage: 208-230 V
Speed: 3450 rpm
Poles: 2
Phase: 1
Insulation class: F
Mounting: C face
Drive end bearing: ball
Enclosure: open drip proof
Ambient temperature: 50°C
Frame: 56J
Thermal protection: automatic
Motor orientation: horizontal
Electrical type: capacitor start capacitor run
Rotation: counter clockwise pump end
Dimensions: 11"H x 9.25"W x 18"L
Shaft diameter: 0.625"
Shaft extension: 2.57"
Frame length: 9.50"
Material(s): stainless steel
Frame material: rolled steel Item:34259532
If you don't want to spend much time maintaining the pools, this motor is a must-have accessory. The performance shortens run times and reduces energy consumption leading to lower operating costs. With this motor, you don't have to compromise with performance and quality.
Product Features:
Stainless steel shaft for corrosion protection
Long lasting with triple seal protection to prevent water and debris intrusion
Voltage change device
Premium sealed 203 bearings both ends
Definitive shaft access (7/16" wrench)
Fast and easy installation with the open and accessible terminal board and wiring compartment
Designed for optimal performance and efficiency
Pump motor has a threaded shaft that allows for convenient and direct mounting
Additional Features:
Output HP: 2.75 HP
Frequency: 60 Hz
Service factor: 1
Output KW: 2.1 kW
Voltage: 208-230 V
Speed: 3450 rpm
Poles: 2
Phase: 1
Insulation class: F
Mounting: C face
Drive end bearing: ball
Enclosure: open drip proof
Ambient temperature: 50°C
Frame: 56J
Thermal protection: automatic
Motor orientation: horizontal
Electrical type: capacitor start capacitor run
Rotation: counter clockwise pump end
Dimensions: 11"H x 9.25"W x 18"L
Shaft diameter: 0.625"
Shaft extension: 2.57"
Frame length: 9.50"
Material(s): stainless steel
Frame material: rolled steel
